Searching for a way to jazz up your wall artwork? Try making your personal Do-it-yourself acrylic frames for individualized 3D artwork. This submit will walk you by way of precisely how I produced these in my dwelling.
If you are seeking for a personalized way to frame your pics or artwork to make it stand out from the wall, these Do-it-yourself acrylic frames are the perfect detail.
I landed on these frames simply because I essential a tiny a thing to increase a minimal excess pizzazz to my lavatory wall. 
We resolved to integrate my spouse&rsquos like of golf into the combine by printing photos he took of PGA golf programs he&rsquos played in black and white.
I like when art is a discussion piece, so this was the great addition to the rest room wall.
To make it actually stand out, I manufactured these Do-it-yourself acrylic frames for each individual of the photos.
Listed here are the steps I took&hellip 
Table OF CONTENTS
- 1. Get your products.
- 2. Tape just about every facet of each individual corner.
- 3. Mark where by you want to drill your holes.
- 4. Drill your holes.
- five. Use your glue dots to protected your images to the body.
- six. Mark the full on the wall in which you prepare to dangle it.
- seven. Use your punch software to mark the complete on the wall.
- eight. Drill your holes in the wall.
- nine. Screw the standoffs into the wall.
- ten. Attach your frame to the standoffs.
- eleven. Revel in the completed solution!
Disclaimer: This submit does consist of affiliate one-way links for your usefulness. This is at NO supplemental charge to you but earns me a smaller fee. To read extra, check out out our disclosure coverage.
one. Gather YOUR Elements.
Initial things initially, get all your resources. All resources for everything I made use of are linked below. i was reading this integrated a list with links of what we utilised to dangle the frames, far too. 
FOR Producing THE Diy ACRYLIC FRAMES:
- Plexiglass/Acrylic Sheets
- Standoffs
- Glue Dots
- Piece of Lined Paper
- Drill 
- Drill Bits (one for the dimensions of the opening of your standoffs and one for the screw for the wall)
- Painter&rsquos Tape
- Ruler
- Marking Tool (I used a Sharpie)
FOR HANGING THE Do-it-yourself ACRYLIC FRAMES:
- Pencil
- Handheld Stage
- Punch
- Screwdriver
two. TAPE Each Facet OF Each and every CORNER.
Plexiglass/acrylic is incredibly delicate.
Simply because of this, you have to be quite careful when you are drilling the holes.
Placing a piece of painter&rsquos tape on possibly facet where you plan to drill your gap will enable keep the acrylic sheet from breaking or cracking when you drill.
I also stored the protective address on just about every aspect of the piece, too.
3. MARK Wherever YOU WANT TO DRILL YOUR HOLES.
As soon as you have placed the painter&rsquos tape on all 4 sides (or however several areas you prepare to drill a hole), you can place a mark of wherever you want to drill your gap.
I drilled my holes 1&Key in from each and every edge as you can see from the image above.
4. DRILL YOUR HOLES.
Before in fact drilling, double and triple look at that your marks are level both horizontally and vertically.
You&rsquoll want to have these degree for when you hold them. 
The drill bit you select should be big more than enough to allow for the standoff to suit in the gap.
I would do a check operate on a piece of scrap materials to make confident it is massive sufficient. 
Once you are selected that the marking are amount and the bit is large enough, you want to commence drilling.
Here is a good video clip to follow if you would like a demonstration on how to drill by means of acrylic.
You want to use about 50 percent energy when you are drilling.
Gradual and continual. If you go to quickly, the acrylic will crack, so take your time.
As you drill you ought to see spirals of the acrylic gradually being removed. 
Repeat the drilling for every hole you will need.
5. USE YOUR GLUE DOTS TO Protected YOUR Photographs TO THE Body.
After your holes are established, you can increase your image to the piece of acrylic/body.
The critical below is to all over again, make absolutely sure your picture is degree right before you wholly secure it to the body.
The glue dots are really sticky and don&rsquot allow for for a good deal of wiggle home, so it may well be a excellent idea to line up a piece of lined paper guiding the frame to enable you line the edges of your photograph.
Whichever trick works for you to make confident the image gets glued to the body stage will do. 
six. MARK THE Whole ON THE WALL In which YOU Program TO Hold IT.
As you commence to hang, mark your holes on the wall, but make guaranteed your body is amount.
If you calculated the right way in the move before drilling, the holes on your frame must now be stage.
If you are hanging extra than a single body like I did, make guaranteed every frame is degree in your grid, as well. 
seven. USE YOUR PUNCH Software TO MARK THE Total ON THE WALL.
I adore this instrument so significantly simply because it gets your hole begun and lets your drill to continue to be in area when you get started drilling.
If you don&rsquot have 1, I remarkably advise it!
eight. DRILL YOUR HOLES IN THE WALL.
Be guaranteed to use a bit that fits the screws that came together with your standoffs.
This will most possible be a smaller bit than the a single you employed on the frames.
I also used a stud finder to see if I wanted drywall anchors, but because these frames are not that large, you could in all probability do without the need of them.
nine. SCREW THE STANDOFFS INTO THE WALL.
When you order your standoffs, you&rsquoll see how they perform.
In buy for the picture to &ldquostand off&rdquo the wall, you have to protected the standoff with the delivered screw right before attaching the photo to the standoffs.
As you can see from the image, building certain every thing is stage and measured accurately is super critical. 
ten. Attach YOUR Body TO THE STANDOFFS.
When you&rsquove connected the standoffs, it&rsquos time to connect the photos!
Line up the standoffs with your drilled holes and safe the standoffs.
If all goes properly, everything will line up properly and be ready to go!
If you are like my dad and I, you&rsquoll occur across at minimum 1 that doesn&rsquot line up correctly.
For this, we cheated a little bit and secured the standoff to the body and utilised a glue dot to safe it to the wall, so it didn&rsquot go.
We only had to do this for two corners of two frames, but don&rsquot stress if you mess up just one&hellip We&rsquove been there! 
11. REVEL IN THE Finished Products!
Now it&rsquos time to appreciate your work!
We did a grid of nine complete pics which was a huge undertaking with all the measuring, but I&rsquom in love with how it turned out.
Enable me know in the remarks what you imagine of the concluded merchandise!